|
The
P0605 Solenoid Valve Controller, by Compact Control Design Limited, has been designed specifically to implement
feedback control of up to 8 valves, solenoids or other electromechanical
devices. In addition to the 8 power control channels the board also has
4 digital I/O channels and 4 analogue input channels. These can be
tailored to a range of voltages and are suitable for connection to a
wide range of sensors.
The
P0605 Solenoid Valve Controller has 8 power control channels each capable of controlling
loads of up to 1 Amp. The module can be configured with paralleled
channels enabling higher current loads to be controlled. The P0605
Solenoid Valve Controller module
includes 4 non-isolated digital I/O signals and 4 analog inputs
supporting a wide range of sensors. All analog input channels can be
tailored to your requirements by resistor selection and analog inputs 3
and 4 can be combined to implement a differential input.
The
P0605 Solenoid Valve Controller module has been designed to ease the task of wiring. All motor drive
signals can be connected directly from the backplane to the motor in
screened cable without the need for splicing. The same also applies for
many sensor configurations. This reduces the cost and complexity of
wiring looms and increases reliability.
Compact
Control Design Limited
provide full programming support for the P0605 Solenoid Valve Controller
module (and all MonCon boards) with
linker scripts, header and include files. We include files and programming examples
enabling you to write your own custom applications in assembler and C.
We also provide a development service providing application firmware to
your specification.
For
enquiries and to purchase the
P0605 Solenoid Valve Controller contact Compact Control Design at sales@compactcontrol.co.uk.
Site
Map |
