P0615 Mini Regulator Module

Up ] P0612 Stepper Driver Module ] P0613 DC Motor Driver Module ] P0614 Driver Evaluation Board ] [ P0615 Mini Regulator Module ] P0701 USB PIC Microcontroller Module ] P0704 PIC Development Board ]

 

Features for the P0615 Mini Regulator Module

Compact Control Design Limited designed the P0615 Mini Regulator Module specifically for use with our P0612 Stepper and P0613 DC Motor boards. One regulator can provide the logic supply requirements for many boards therefore saving both cost and power.  

P0615 Mini Regulator Module

 

The P0615 Mini Regulator Module is versatile with a wide input voltage range. 

 

The P0615 Mini Regulator Module, from Compact Control Design Limited, measures 27mm by 26mm and is 11mm wide. This small-sized, compact module is ideal wherever +5 volts at low current, below 400mA, is required. 

 

The P0615 Mini Regulator Module is a switch mode, hysteretic version with a very wide input voltage range of 10 to 40 volts. The module generates very low switching noise on its input and output, with the output ripple from the module also being low.

Compact Control Design Limited can provide versions with other output voltages. Simply e-mail us your requirements at: design@compactcontrol.co.uk.

Download the data sheet (PDF format)

Purchase 1 to 9 regulators

£11.00 each

Purchase packs of 10 regulators

£95.00 per pack

Purchase the P0615 Mini Regulator Module from our web shop

Site Map